Eizo COLOREDGE CG2730, Руководство пользователя

Страница: 45 / 58

45
Chapter 6 Reference
6-5. Specifications
LCD Panel Type IPS (Anti-Glare)
Backlight Wide color gamut LED
Size 68.5 cm (27.0 inch)
Resolution 2560 dots × 1440 lines
Display Size (H × V) 596.7 mm x 335.6 mm
Pixel Pitch 0.2331 mm x 0.2331 mm
Display Colors Approx. 1073.74 million colors (for 10 bit input)
Viewing Angle (H × V, typical) 178˚ / 178˚
Recommended Brightness
(typical)
120 cd/m
2
or less (Temperature: 5000 K to 6500 K)
Contrast Ratio (typical) 1500 : 1 (When "DUE Priority" setting is "Brightness")
Response Time (typical) Black - White - Black: 20 ms
Gray-to-gray: 13 ms
Color Gamut Display (typical) Adobe
®
RGB coverage: 99 %, NTSC ratio 108 %
Video Signals Input Terminals DVI-D x 1: Supports 8-bit display (Single Link / Dual Link,
HDCP-compatible)
HDMI x 1: Supports 8-bit, 10-bit, and 12-bit display
*1, *2
(HDCP-compatible)
DisplayPort x 1: Supports 8-bit and 10-bit display (HDCP-
compatible)
*1 The maximum number of display bits for HDMI-input
images is 10.
*2 Supports 8-bit display when the resolution of the HDMI
input signal is 2560 x 1440.
Horizontal scanning frequency 26 kHz to 89 kHz (DVI, DisplayPort), 15 kHz to 89 kHz
(HDMI)
Vertical scan frequency 23 Hz to 61 Hz (For 720 x 400: 69 Hz to 71 Hz)
Frame Synchronization mode 23.75 Hz to 30.5 Hz, 47.5 Hz to 61.0 Hz
Dot clock (Max.)
242 MHz
USB Port
Upstream port x 2, downstream port x 3 (the port
supports quick charging)
Standard USB Specification Rev. 3.0
USB Battery Charging Specification Rev.1.2
Communication Speed 5 Gbps (super), 480 Mbps (high), 12 Mbps (full), 1.5 Mbps
(low)
Supply Current Downstream : Max. 900 mA per port
Downstream
(
port )
: Normal: Max. 1.5 A per port, Charging
Only: Max. 2.1 A per port
Power Input 100–240 VAC ±10 %, 50/60 Hz 1.0 A–0.45 A
Maximum Power Consumption 95 W or less
Power Save Mode
0.6 W or less
(When “DP Power Save” is set to “ON”, “USB CHARGE
Port” is set to “Normal”, and no USB device is connected)
Standby Mode 0.6 W or less
(When “DP Power Save” is set to “ON”, “USB CHARGE
Port” is set to “Normal”, and no USB device is connected)