Transport and storage
8
FM074342
2015-10-09·BA00·III·en·04
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6
Transport and storage
6.1
General
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
6.2
Batteries
• Do not transport together with other materials.
• Handle with care.
• Store protected from fire, sources of dust, harmful gases and liquids.
• Store in a dry and cool location.
Recommendation:
• Store battery at an ambient temperature of + 5 °C to + 25 °C and a relative humidity
of 65 ± 5 %. The storage period is reduced of up to one month if stored outside this
temperature range..
7
Mounting and installation
Enclosure material
polyamide, impact-resistant, black
Mounting
wall or table mounting
Connection cables
charging cable 110 ... 240 V AC: approx. 1.8 m long, with Europlug, 2-pin
charging cable 12 ... 30 V DC: approx. 1.8 m long, with free ends, 2-pin
Note
Ex operation
Attention!
The charging units are not suitable for use in hazardous areas!
Charging units must always be mounted in NON-Ex areas!
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
Technical Data
