FM074342
2015-10-09·BA00·III·en·04
Safety notes
5
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3
Safety notes
3.1
Operating instructions storage
• Read the operating instructions carefully and store them at the mounting location of
the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2
Safe use
• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
3.3
Intended Use
The portable lamp HSE 7 LED is equipment
• for mobile applications
• usable in a motor vehicle
• for use in Zones 1, 21, 2, 22 and in the safe area
• can be used indoors and outdoors
3.4
Modifications and alterations
4
Function and device design
4.1
Function
• To switch on, switch off, dim and make main light with LED flash
• To switch on and switch off secondary light with LED
• Emergency lighting function in connection with charging unit
• The emergency lighting function can be deactivated and activated
• To charge the battery via the charging unit
• Battery capacity test
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device. No liability or warranty for damage
resulting from modifications and alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.
