CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology
with your new OttLite
®
product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form
and return it today by mail, or register online by going to:
OttLite.com/warranty.
WARNING
! To prevent electrical shock, make sure
the lamp is not plugged in until all assembly steps
are complete.
LAMP ASSEMbLy
1.
Unpack all lamp parts and lay out on the floor with the
base
(A)
laying flat.
2.
Thread lower pole
(B)
to base
(A)
by hand turning
clockwise until tight.
3.
Attach shade
(E)
to socket cup
(D)
using socket ring
(F)
to hold shade in place.
4.
Thread socket ring
(F)
in socket cup
(D)
by turning
clockwise until tight enough to hold the shade steady.
5.
To postion the shade
(E)
, loosen thumbscrews
(C)
. Move shade
(E)
into position, then tighten
thumbscrews
(C)
by hand until snug.
DO NOT
force
thumbscrew as damage to the lamp may occur.
6.
Install bulb following
BULB INSERTION/
REPLACEMENT
instructions.
7.
Adjust height of pole
(H)
by turning knob
(I)
counter
clockwise until desired height. To tighten, turn knob
(I)
clockwise.
8.
Plug the lamp into a standard 120V outlet.
9.
To turn the lamp on or off, toggle the power cord
mounted switch
(J)
.
bULb INSERTION/REPLACEMENT
1.
Make sure the lamp is not plugged into an electrical
socket.
2.
If the lamp has been in use, allow it to cool for
approximately 5 minutes before proceeding.
3.
To install the bulb
(G)
in the socket
(D)
, thread the
base of the bulb into the socket
(D)
turning clockwise
until snug.
CAUTION: DO NOT
over tighten the bulb. Over
tightening the bulb may make removal difficult or
damage the lamp or bulb.
4.
To remove a bulb
(G)
already installed in the lamp,
unthread the bulb from the socket
(D)
turning
counterclockwise to loosen.
Enjoy your OttLite 15w Provo Table Lamp!
Please note that in operation, OttLite tubes are not
dimmable.
This lighting system is designed for use with OttLite
®
type (Style Number ED15-S). Use of other products
voids the warranty and may result in damage to the
lighting system.
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF ELECTRIC
SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
INSERTED. DO NOT ALTER THE PLUG.
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE
MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This product complies with Part 18 of FCC Rules, but may cause interference to radios, televisions, wireless telephones, and remote controls.
Avoid placing this product near these devices. If interference occurs, move the product away from the device or plug either into a different
outlet. Do not install this product near maritime safety equipment or other critical navigation or communication equipment operating between
0.45-30 MHz.
This Class B RFLD complies with Canadian ICES-005
INS-14-0117
REV071614
English
15w Provo Table Lamp
15w Provo Table Lamp
15486RBS 15484RBS
S2427
CONGRATULATIONS!
You’ve purchased the finest in natural lighting
technology with your new OttLite
®
product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today by mail,
or register online by going to:
www.OttLite.com/warranty.
WARNING: To prevent electric shock, make
sure the lamp is not plugged in until all
assembly steps are complete.
LAMP ASSEMBLY
1.
Unpack all lamp parts and lay out on
the floor with the base (A) laying flat.
2.
Thread lower pole (B) to base (A) by
hand turning clockwise until tight.
3.
Attach shade (E) to socket cup (D)
using socket ring (F) to hold shade in place.
4.
Thread socket ring (F) in socket cup (D)
by turning clockwise until tight enough to
hold the shade steady.
5.
To postion the shade (E), loosen thumbscrews
(C). Move shade (E) into position, then tighten
thumbscrews (C) by hand until snug.
DO NOT force thumbscrew as damage to the
lamp may occur.
6.
Install bulb following BULB
INSERTION/REPLACEMENT instructions.
7.
Adjust height of pole (H) by turning knob (I)
counter clockwise until desired height. To tighten,
turn knob (I) clockwise.
8.
Plug the lamp into a standard 120V
outlet.
9.
To turn the lamp on or off, toggle the power
cord mounted switch (J).
BULB INSTALLATION AND REMOVAL
1. Make sure the lamp is not plugged into an
electrical socket.
2. If the lamp has been in use, allow it to cool
approximately 5 minutes before proceeding.
3. To install the bulb (G) in the socket (D), thread
the base of the bulb into the socket (D) turning
clockwise until snug.
CAUTION: DO NOT over tighten the bulb. Over
tightening the bulb may make removal difficult
or damage the lamp or bulb.
4. To remove a bulb (G) already installed in the
lamp, unthread the bulb from the socket (D) turn-
ing counterclockwise to loosen.
Please note that in operation, OttLite
®
tubes are
not dimmable.
Enjoy your OttLite
®
Provo Table lamp!
This lighting system is designed for use with
OttLite
®
type (Style Number ED15-S). Use
of other products voids the warranty and may
result in damage to the lighting system.
ENGLISH
Provo Table Lamp
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS
PLUG CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION!
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard. Indoor use only.
INS110015 111811
15w Provo Table Lamp
15484RBS
S2427
C
D
E
F
G
B
J
A
I
H
CONGRATULATIONS!
You’ve purchased the finest in natural lighting
technology with your new OttLite
®
product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today by mail,
or register online by going to:
www.OttLite.com/warranty.
WARNING: To prevent electric shock, make
sure the lamp is not plugged in until all
assembly steps are complete.
LAMP ASSEMBLY
1.
Unpack all lamp parts and lay out on
the floor with the base (A) laying flat.
2.
Thread lower pole (B) to base (A) by
hand turning clockwise until tight.
3.
Attach shade (E) to socket cup (D)
using socket ring (F) to hold shade in place.
4.
Thread socket ring (F) in socket cup (D)
by turning clockwise until tight enough to
hold the shade steady.
5.
To postion the shade (E), loosen thumbscrews
(C). Move shade (E) into position, then tighten
thumbscrews (C) by hand until snug.
DO NOT force thumbscrew as damage to the
lamp may occur.
6.
Install bulb following BULB
INSERTION/REPLACEMENT instructions.
7.
Adjust height of pole (H) by turning knob (I)
counter clockwise until desired height. To tighten,
turn knob (I) clockwise.
8.
Plug the lamp into a standard 120V
outlet.
9.
To turn the lamp on or off, toggle the power
cord mounted switch (J).
BULB INSTALLATION AND REMOVAL
1. Make sure the lamp is not plugged into an
electrical socket.
2. If the lamp has been in use, allow it to cool
approximately 5 minutes before proceeding.
3. To install the bulb (G) in the socket (D), thread
the base of the bulb into the socket (D) turning
clockwise until snug.
CAUTION: DO NOT over tighten the bulb. Over
tightening the bulb may make removal difficult
or damage the lamp or bulb.
4. To remove a bulb (G) already installed in the
lamp, unthread the bulb from the socket (D) turn-
ing counterclockwise to loosen.
Please note that in operation, OttLite
®
tubes are
not dimmable.
Enjoy your OttLite
®
Provo Table lamp!
This lighting system is designed for use with
OttLite
®
type (Style Number ED15-S). Use
of other products voids the warranty and may
result in damage to the lighting system.
ENGLISH
Provo Table Lamp
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS
PLUG CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION!
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard. Indoor use only.
INS110015 111811
15w Provo Table Lamp
15484RBS
S2427
C
D
E
F
G
B
J
A
I
H
