GB
- 18 -
Important.
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of swal-
lowing or suffocating!
•
Airbrush compressor
•
Compressed air hose
•
Airbrush spray gun
•
Glass cup
•
Glass cup with intake connector
•
Gun holder, for mounting on a workbench or
wall
•
Wrench
•
Metal paint cup
•
Original operating instructions
3. Intended use
The compressor is designed to generate com-
pressed air for airbrush guns.
The airbrush spray gun is designed for spraying
paints suitable for airbrushing. The spray gun
may be used only with a suitable compressed air
source.
The equipment may be used only for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
4. Technical data
Mains voltage: ................................ 230 V ~ 50 Hz
Motor rating: ................................................. 90 W
Compressor speed (idling) rpm: ................... 1450
Max. operating pressure:.............................. 4 bar
Recommended working pressure: ....... 1.7 - 2 bar
Theoretical intake capacity l/min: ..................... 19
Protection type: ............................................ IP 20
L
pA
sound pressure level ..................... 61.4 dB(A)
K
pA
uncertainty ..............................................3 dB
L
WA
sound power level ......................... 81.8 dB(A)
K
WA
uncertainty .............................................3 dB
Unit weight in kg, including
accessories: ................................... approx. 5.1 kg
Compressed air quality: ....... Free of oil and water
Suitable paint materials and cleaning pro-
ducts
•
Airbrush paints and coatings as well as very
fine pigmented water-based and solvent-
based paint can be used with this equipment.
•
The paint you use should have a milky watery
consistency and should not be too viscous.
•
If necessary use suitable thinning material for
the paints, following the instructions provided
by the manufacturer.
•
Ensure that the paints you use are suitable for
the surface you wish to coat.
•
Ensure that the primer, undercoat and top-
coat are compatible with each other.
•
Cleaning materials must be tailored to the
paint you use and must not have a damaging
effect on the metal parts of the airbrush spray
gun.
•
Follow the manufacturer’s instructions.
5. Notes on installing
•
Check the equipment for damage which may
have occurred in transit. Report any damage
immediately to the transport company which
was used to deliver the compressor.
•
Install the compressor in the vicinity of the
point of consumption.
•
Avoid long air lines and supply lines (extensi-
on cables).
•
Make sure that the intake air is dry and dust-
free.
•
Do not install the compressor in a damp or
wet room.
Anleitung_BT_AB_19_4_Kit_SPK7.indb 18
06.09.11 13:30
