background image

GB

- 16 -

m

 Important!

When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety information

1.1 Safety information

Important. The following basic safety 

actions must be taken when using this com-

pressor in order to protect the user from 

electric shocks and the risk of injury and fire. 

Read and follow these instructions before 

using the equipment.

This equipment is not designed to be used by 

people (including children) with limited physical, 

sensory or mental capacities or those with no 

experience and/or knowledge unless they are su-

pervised by a person who is responsible for their 

safety or they have received instructions from 

such a person in how to use the equipment safely. 

Children must always be supervised in order to 

ensure that they do not play with the equipment.

1.  Keep your work area tidy. Untidy work areas 

can result in accidents.

2.  Make allowance for ambient conditions. Do 

not expose the compressor to rain. Never 

use the compressor in damp or wet locations. 

Provide good lighting. Do not use the com-

pressor near flammable liquids or gases.

3.  Guard against electric shock. Avoid bodily 

contact with earthed parts (e.g. pipes, radia-

tors, cookers and refrigerators).

4.  Keep children away! Do not allow other per-

sons to touch the compressor or cable, keep 

them away from your work area.

5.  Keep your compressor in a safe place. When 

not in use, the compressor should be stored 

in a dry, locked room out of children‘s reach.

6.  Do not overload your compressor. It will work 

better and safer when used within its quoted 

capacity range.

7.  Wear suitable work clothes. Never wear loose 

fitting clothes or jewelry. They may get caught 

in moving parts. Rubber gloves and non-slip 

shoes are recommended when working out-

doors. Wear a hair net if you have long hair.

8.  Do not use the cable for purposes other than 

that for which it is designed. Do not carry the 

compressor by its cable and do not use the 

cable to pull the plug out of the socket. Pro-

tect the cable from heat, oil and sharp edges.

9.  Take care of your compressor. Keep your 

compressor clean to ensure that it works 

efficiently and safely. Follow the maintenance 

instructions. Check the power plug and cable 

on a regular basis and have them replaced by 

an authorized specialist if they are damaged. 

Check the extension cable regularly and re-

place it if damaged.

10.  Pull out the power plug. When the equipment 

is not in use and before carrying out any 

maintenance work.

11.  Avoid unintentional starting. Make sure that 

the switch is turned off when connecting the 

tool to the power supply.

12.  Use in enclosed areas. Avoid moisture and do 

not use the equipment outdoors.

13.  Be alert at all times. Keep an eye on your 

work. Use common sense when working. 

Never use the compressor when you are dis-

tracted.

14.  Check the compressor for damage. Before 

using the compressor again, check the safety 

devices or any slightly damaged parts to 

ensure that they are in good working order. 

Check that the moving parts are working cor-

rectly, that they do not jam, and that no parts 

are damaged. Make sure that all parts are fit-

ted correctly to ensure that the equipment re-

mains safe to use. Unless otherwise stated in 

the operating instructions, damaged guards 

and parts have to be repaired or replaced 

by a customer service workshop. Damaged 

switches have to be replaced by a customer 

service workshop. Never use an electric pow-

er tool with a switch that cannot be turned on 

and off.

15.  Important. For your own safety you must use 

only the accessories and additional units 

listed in the operating instructions or recom-

mended or specified by the manufacturer. The 

use of mounted tools or accessories other 

than those recommended in the operating in-

structions or catalog may place your personal 

safety at risk.

Anleitung_BT_AB_19_4_Kit_SPK7.indb   16

06.09.11   13:30

Содержание BT-AB 19/4 Kit





































Отзывы: