41
Note
Hiding the Projected
Image (Shutter function)
This function allows you to tempo-
rarily hide the projected image.
1
Press
SHUTTER CLOSE
.
•
The projected image is hidden.
2
Pressing
SHUTTER OPEN
will
turn the projected image back
on.
In the following cases, hiding will be cancelled
automatically.
•
When
STANDBY-ON
on the projector or on
the remote control is pressed.
•
When a caution or information message is
displayed.
•
When the power is turned on.
Displaying and Setting
the Break Timer
This function allows you to show the re-
maining time for break during meeting.
1
Press
BREAK TIMER
.
2
While “
” is displayed, press
'
,
"
,
\
or
|
to set the break timer.
•
You can set anywhere between 1 and
60 minutes (in 1 units).
•
The break timer starts to count down as
soon as
'
'
'
'
'
,
"
"
"
"
"
,
\
\
\
\
\
or
|
|
|
|
|
is pressed.
Note
•
Pressing
UNDO
will cancel the break timer.
•
Auto Power Off function will be temporarily dis-
abled during the break timer.
When no input signal is detected for more than
15 minutes, the projector will automatically enter
the standby mode if the break timer has elapsed.
•
The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page
58
).
•
When “Slave” is set for “Stack Setting”, the
break timer is not displayed. (See page
62
.)
▼
On-screen display
SHUTTER
buttons
Mouse/adjustment
button
(
'
/
"
/
\
/
|
)
UNDO button
BREAK TIMER
button
