68
Cleaning and Replacing the Dust Filters
4
Replace the filter cover.
•
Insert the filter cover as shown in the
figure and push both the two tabs until
you hear a click.
Remove
Attach
Pierced through
the nine slits.
Insert the filter
below the six tabs
on both left and
right sides.
Note
•
Be sure the filter cover is securely installed.
The power will not turn on unless it is cor-
rectly installed.
Replacing the Dust Filters
After removing the filter cover (see
step 2 of “Cleaning the Dust Filters”),
remove the dust filters, then replace
with new ones.
•
Pick the dust filters up with your fingers and lift
them out of the filter cover.
•
When attaching the dust filters, make sure that
these are inserted below the tabs on both left
and right, and that the slits are pierced through.
•
If the filters become too dirty to clean effec-
tively, purchase new ones (9NK3243101400)
from your nearest EIKI Authorized Dealer or
Service Center.
Info
1
2
