
ENGLISH
49
2. Mounting (external motor)
NOT ALL MODELS - Is the hood for external located motor, perform the
following:
1. Mark a vertical line on the wall, showing the center of the hob.
2. The distance between the holes and the hob must be calculated so that
the lower part of the assembled hood is placed at least 400-450 mm
above electric hob and 550 mm above gas burner. Mark the location of
mounting screws. Located 370 mm from the lower part of the hood.
3. Drill the marked holes with a drill having a diameter corresponding to
the fitting plugs. (Fig. 3) G and H. Set the wall plugs in the holes and
screw the screws to the wall.
4. Place the cooker hood on the screws.
5. If the cooker hood is used in the version with ducted to the outside,
mounted exhaust pipe now.
6. Place the motor box S, where it is desired, for example. in the attic
above the kitchen. Mount the motor box.
7. Connect the hood to the motorbox with Ø 150 ventilation duct R.
8. Set the motor power cable and power cable together.
9. Connect the motor box S for ventilation duct.
10. Mark the appropriate height for the bracket for the chimney portion F
(fig. 1).
11. Now push the chimneyparts (B og C) into place in the appropriate
height (fig. 1)
12. Attach the upper chimney to the bracket F, fig. 1
13. Connect to the main supply