
ENGLISH
48
1. Mounting (built-in motor)
1. Mark a vertical line on the wall, showing the center of the hob.
2. The distance between the holes and the hob must be calculated so that
the lower part of the assembled hood is placed at least 400-450 mm
above electric hob and 550 mm above gas burner. Mark the location of
mounting screws. Located 370 mm from the lower part of the hood.
3. Drill the marked holes with a drill having a diameter corresponding to
the fitting plugs. (Fig. 3) G and H. Set the wall plugs in the holes and
screw the screws to the wall.
4. Place the cooker hood on the screws.
5. If the cooker hood is used in the version with ducted to the outside,
mounted exhaust pipe now.
6. (NB: For filter version)
now mount the plate for regulation of air F together with the wall
bracket.
The module F are intended to guide the air through the recirculation air
outlets in the upper portion of the upper stack module. Use the same
mounting screws.
7. Mark the appropriate height for the bracket for the chimney portion F
(fig. 1).
8. Now push the chimneyparts (B og C) into place in the appropriate
height (fig. 1)
9. Attach the upper chimney to the bracket F, fig. 1
10. Connect to the main supply
.