
ENGLISH
47
III Technical data
Model
FIRENZE P 60 ECO
FIRENZE P 80 ECO
Voltage
AC 230V 50Hz
Motors
1
Lighting
LED 2x3W
Number of metal filters
1
Width [cm]
60
80
Depth [cm]
47
Hight [cm]
91-137
Outlet [ø mm]
150
Version
Ventilation or recirculation
Finish
Stainless steel / glass
IV. Installation
It is recommended that the hood installation is done by authorized personnel
and that are 2 to do the job
.
For mounting the cooker hood the following steps will guide you:
1.
Mark drill holes on the wall
2.
Mark the minimum distance between hob and cooker hood
3.
Drill holes in the wall and insert dowels , G og H (fig. 3)
4.
Now mount the hood, A (fig. 1)
5.
Now connect the hood to the exhaust pipe
6.
Connect the cooker hood to the main supply
7.
Install wall brackets F (fig. 1) in the right position
8.
Mount the chimney parts B og C (fig. 1)
The cooker hood is opened by lifting the lower plate with two hands where the
lights are placed. The extraction hood has a gas arm, which carries the weight
of the glass front after opening. It is necessary to open the front glass to clean
the grease filter and replacing coal / recirculation filter (in recirculation mode).
Before use, it is normal to close the front again. However, it can be left open
during operation.