33
Appendix A: Battery Expansion Cabinet Installation – batteries #5 to #8
The Evolve LFP AU system supports up to two additional expansion cabinets. Where duplicated, the mechanical
assembly and wiring instructions will be referenced to previous sections within this document. All instructions
specific to the first expansion cabinet are documented below, with battery modules numbered 5 to 8 inclusively.
Startup and operation remains unchanged.
A.1 Initial Inspection of Material List – top level system components
The system components supplied are shown below. Each component should be inspected visually for any damage
that may have been caused by shipment. If damage is present, please contact your local distributor.
A.1.1 LFP AU battery expansion materials list.
A.1.2 Expansion install kit – mechanical parts
Item Qty Eguana P/N
Description
1
1
PB kit
Incl. cabinet coupler assembly, two levelling brackets, and two plugs
2
8
-
Adhesive backed battery module pads
3
1
-
Battery rack partition bracket (includes attached battery retaining clip)
Item Eguana P/N
Description
1
ACB05-PB
Battery Cabinet (and cover)
2
-
Expansion wall mount bracket
3
US3000C
4 battery modules.
4
LFP expansion install kit
Assembly parts kit and cables.
1
2
3
4
PB kit
M4 x 25 mm
1
3
4
8x
Figure 26: Expansion cabinet materials list.
Figure 27: Expansion cabinet hardware kit.
