14
5.3 Preparing battery modules for
installation
The PCS cabinet is not shown in the following
steps.
CAUTION!
Ensure the battery module
power switches are in the OFF position
throughout the following procedure.
Note: Observe the rotation of the
modules on the lower and upper racks.
The lower rack is rotated such that the chassis
ground terminal is at the bottom of the module,
while the upper rack chassis ground terminal is
at the top.
1.
(not shown) Remove a battery from its
packaging. Remove the rackmount
ears, if supplied with the battery.
2.
Attach two adhesive-backed module
pads (included in the battery module
hardware kit) to the battery modules as
shown. For the lower rack of modules,
the pads are installed on the top face of
the battery. For the upper rack, the
pads are installed on the bottom face of
the battery.
upper rack
lower rack
Figure 10: Battery module spacer preparation.
