Egnite EGN600114, Руководство пользователя

Страница: 41 / 130

2. On the next page, enter the mail address for the
account that you wish to send email alerts from in
the input field
Sender .
3. Enter the address or IP-address for the mail-server
used by the mail account in the input field
SMTP
server .
4. Enter the Port used by the email account.
5. If your mail account is password protected, activate
the checkbox
Authentication .
6. Enter the user name in the input field User name and
the password in the input field Password .
7. Click the button Test to check your settings. If the
test is successful, the button will turn green. If any
entries are faulty, the corresponding field will be
highlighted in red. Where necessary, correct the data
and click
Test again.
8. Click Save to apply your changes.
i Information
Passwords are not encrypted on the device.
Therefore, it is strongly advised that you do not use
any email accounts that are used for sending
confidential information or, if possible, to create a
dedicated account for Querx.
38