EFKA FP220A5911
45
10.8.3 Setting the Positions on the V810 Control Panel (Parameter 270 = 0)
If parameter 270 = 0, the positions integrated in the motor are activated and can be set as follows:
Select parameter 171
"
Press the
E
key
"
Press the
>>
key (B key).
Display of the 1st parameter value
"
of position 1
If necessary, change parameter value by pressing
the
>>
or
+/-
key or by turning the handwheel
"
Parameter value of position 2
appears on the display
"
If necessary, change parameter value by pressing
the
>>
or
+/-
key or by turning the handwheel
"
Parameter value of position 1A
appears on the display
"
If necessary, change parameter value by pressing
the
>>
or
+/-
key or by turning the handwheel
"
Parameter value of position 2A
appears on the display
"
If necessary, change parameter value by pressing
the
>>
or
+/-
key or by turning the handwheel
"
Press the P key twice.
Settings are completed.
"
Exit programming.
These values are saved when you start sewing. They remain in effect even after turning the machine off!
10.8.4 Setting the Positions on the V820 Control Panel (Parameter 270 = 0)
If parameter 270 = 0, the positions integrated in the motor are activated and can be set as follows:
Display before programming
"
A parameter number blinks
"
on the display
Input parameter number 171
"
The abbreviation of the parameter
appears on the display
"
F – 1 7 1
E
[ o ]
»
P 1 E 1 4 0
+
-
P 1 E X X X
E
P 2 E 2 6 0
P
P
F P 2 2 0 A
+
-
P 2 E X X X
E
P 1 A 0 8 0
+
-
P 1 A X X X
E
P 2 A 4 0 0
+
-
P 2 A X X X
1
7
F-171
1
E
F-171 Sr2 [o]
4000 FP220A
P
F–XXX
