E F A P O W E R E V - H C - I N S T A L L A T I O N A N D U S E R M A N U A L
7 | 28
5
INSTALLATION
All matters for installing the EFAPOWER EV-HC are described in this chapter.
5.1
ENVIRONMENTAL REQUIREMENTS
EFAPOWER EV-HC Station reliability is dependent upon compliance of environmental specifications. The design
of the environmental control system for your EFAPOWER EV-HC Station, in case of extreme environmental
conditions, must ensure that the Unit can operate reliably while remaining within the range of its operating
specifications.
5.1.1
LOCAL CONDITIONS
EFAPOWER EV-HC Station has a protection degree of IP54. This Unit is intended to
work below 50ᵒC ambient
temperature.
Clearance around the unit
There should be enough space to operate the unit in the front and both sides. For EV-HC 11 / 22 please ensure
also clearance in the bottom to access to the RCD.
Input Power Cables
AC input cables must be copper with appropriate power rating.
EFAPOWER EV-HC is intended to be placed on the wall, as showed in Figure 5.
Figure 5 - EFAPOWER EV-HC Station
–
placing
