EFA trimmer Translation of the operating instructions
EN
Part no. 001580629
– V09.2021
27 of 37
Fig. 7.1
– Loosening the
screw
Fig. 7.2
– Lever open the
blade fixture
7
Assembly
Warning!
Unintentional switching on!
Before carrying out any assembly work, switch off the device and disconnect it from the
electrical system or compressed air network!
7.1
Changing the blade
Attention!
Only use genuine spare parts!
This is the only way to ensure the proper functioning of the machine.
Attention!
Cutting hazard
!
Wear cut-resistant safety gloves!
The EFA trimmer has a blade that is driven via a pinion.
7.1.1
Dismantle the blade
Cutting hazard!
Wear safety gloves!
Loosen the screw (1),
see Fig. 7.1.
Insert the tool change key (2) between the
screw and housing (3),
see Fig.
7.2.
Pry the knife fixture (4) open with slight
pressure and hold it,
see Fig.
7.2.
Hold the tool change key (2) in position.
1
2
3
4
