EDT PCIe Gen1 Framegrabbers, Руководство пользователя

Страница: 35 / 43

Camera Link PCI Express (PCIe) Gen1 Framegrabbers Appendix B: Board Diagrams
EDT, Inc. 2012 March 16 30
Via Optional Cable Assembly
For the PCIe8 DV / DVa C-Link and the PCIe4 DVa C-Link, there is an optional EDT-built cable assembly
for triggering, timestamping, or both; below are the pin assignments (see also
Appendix C: Timestamping ).
Below is a legacy version of the cable, which is supported only for legacy applications that still use it.
Table 6. Pin assignments – Current EDT cable assembly for triggering, timestamping, or both
EDT p/n 016-13840 (June 2010): [color] Lemo D9 Function BNC BNC Label
:
green 1 2 trigger 1+ center conductor TRIG 1
red 2 9 reserved – –
orange 3 7 trigger 0+ center conductor TRIG 0
brown 4 8 trigger 0- shield TRIG 0
white 5 4 IRIG IN center conductor IRIGB
blue 6 3 trigger 1- shield TRIG 1
black 7 5 ground shield IRIGB
For length, Lemo to D9 = 1 ft.; three BNCs out to D9 = each 6 in. or less.
Table 7. Pin assignments – Legacy EDT cable assembly for triggering, timestamping, or both
EDT p/n 016-02894 (legacy): [color] Lemo Function
: green 1 –
red 2 –
orange 3 –
brown 4 –
white 5 (to center conductor of coaxial cable)
blue 6 –
black 7 (to shield of coaxial cable)
For length, Lemo cable = 2 ft.; BNC cable = approximately 36 in.