EDM Avistar PhaseTrakker AP30, Руководство пользователя

Страница: 20 / 60

Operating the Hotstick Unit PhaseTrakker AP30
16
Reception can be improved further by elevating the Field Unit off the ground
(placing it on a cement block, for example).
A probe tip attachment is provided for use in URD cabinets and other situations
where the Hook attachment is inconvenient.
The Hotstick Unit sensor can be removed from the rubber boot and used at low
voltages with the supplied Test Lead. The Test Lead snaps onto a stud on the
back of the sensor. The Test Lead must not be used above 300 V. The TEST/ON
switch must be used to turn the Hotstick Unit on for use at low voltages.
For best results when using the Hotstick Unit sensor with the test lead, hold your
hand flat or place the sensor on a level surface.
The Hotstick Unit operates on a 9 V battery. To replace the battery, remove the
Hotstick Unit sensor from the rubber boot and remove the battery compartment
cover on the back of the unit.