Edirol VMC-1, Руководство пользователя, Страница: 8 / 40

8
Names of Things and What They Do
1. DV connector 2 [DV2 IN/OUT]
Connect your DV device or computer here.
* You cannot use this simultaneously with the DV connector 1 on the VMC-1’s rear panel (p. 10). If
you attempt to use both simultaneously, your DV device may not function correctly.
2. DV input button [DV IN]
Turn this on if you want the video and audio signals from your DV device to be sent from
the analog output.
3. Analog input button [ANALOG IN]
Turn this on if you want the video and audio signals from the analog input to be sent from
the analog output.
4. Frame synchronizer indicator [FRAME SYNC]
This indicator will light when an analog video signal is input. The frame synchronizer
corrects synchronization inaccuracies caused by an unstable video signal, preventing lost
frames and audio dropouts.
5. Time base corrector button [TBC]
This corrects the image jitter that often occurs when an analog video deck is playing back.
Normally, you should leave this on. If this is on, the video and audio signals will be output
with a delay compared to the input signal, in order to allow for this processing to be
performed. If this delay is a problem, you can turn this function off.
Front Panel
VMC-1(A5)_e.book 8 ページ ２００５年１１月１４日 月曜日 午後２時５１分