
7
Main Features
This function corrects inaccuracies in the timing of the video signal. Due to the mechanical
characteristics of consumer analog video decks, the preceding or following frame can
sometimes be output “out of step.” The Frame Synchronizer corrects slight inaccuracies of
the synchronization signal to prevent frame dropouts and audio dropouts. (p. 8)
* This will automatically turn on only when you use analog input.
The image from a consumer analog video camera or dubbed video tape sometimes does not
have the optimal brightness. If such an image is digitized, over-exposed whites or under-
exposed blacks may occur. AGC corrects these problems by automatically optimizing the
brightness of the analog video. You can use a front panel button to switch this function on/
off. (p. 9)
* Available only for analog input.
* Correction is not possible if the input video already has over-exposed whites or under-exposed blacks.
* You cannot convert from NTSC to PAL or vice versa.
* 16:9 screen mode is not supported.
Each set provides an S-video jack and a composite video jack, and they are capable of
providing simultaneous output. Analog input -> analog output is also supported, allowing
conversion between S-video connector <-> video jack (composite).
Frame Synchronizer Prevents Frame Dropouts and Audio
Dropouts
AGC Function Corrects Over-Exposed Whites or Under-
Exposed Blacks
Support for Both NTSC and PAL
Two Sets of Analog Output Jacks Provided
VMC-1(A5)_e.book 7 ページ 2005年11月14日 月曜日 午後2時51分
Содержание VMC-1
Страница 37: ...VMC 1 A5 _e book 37 ページ 2005年11月14日 月曜日 午後2時51分 ...
Страница 38: ...VMC 1 A5 _e book 38 ページ 2005年11月14日 月曜日 午後2時51分 ...