Edirol VMC-1, Руководство пользователя, Страница: 11 / 40

Español
Italiano
Français
Deutsch
English
11
Names of Things and What They Do
1. Video format setting switch [Video Format]
Specifies the video signal format.
2. NTSC setup level setting switch [NTSC Setup Level]
Specifies the NTSC setup level.
Select 0IRE in Japan, and select 7.5IRE in North America.
3. Locked Audio mode setting switch [Locked Audio Mode]
Specifies the Locked Audio mode for analog input.
4. Audio format setting switch [Audio Format]
Specifies the audio sampling rate and bit depth when using analog input.
5. Audio mix mode setting switch [Audio Mix Mode]
Specifies whether the sub-channels will be output when you input 32 kHz/12-bit 4-channel
audio format via DV.
6. Audio muting time setting switch
Depending on the video editing software you’re using, you may experience audio noise at the
beginning of playback if this switch is turned
ON
. In this case, use the
OFF
setting.
* When the VMC-1 is shipped from the factory, DIP switch 6 is turned
OFF
.
Make sure to turn off the power before you change the settings of the DIP switches on the
bottom panel.
Bottom Panel (DIP Switches)
OFF NTSC
ON PAL
OFF 0IRE
ON 7.5IRE
OFF Locked
ON Unlocked
OFF 48kHz/16bit
ON 32kHz/12bit
OFF Main only
ON Mix 50% main + 50% sub
OFF Normal
ON Short
SER.NO. SER.NO.
MODEL MODEL VMC-1 VMC-1
MADE IN JAPAN MADE IN JAPAN
OFF ON
1 Video Format NTSC PAL
OFF ON
2 NTSC Setup Level 0 IRE 7.5 IRE
3 Locked Audio Mode LOCKED UNKOCKED
4 Audio Format 48kHz / 16bit 32kHz / 12bit
5 Audio Mix Mode MAIN MAIN+SUB
6 Reserved
OFF ON
1
2
3
4
5
6
VMC-1(A5)_e.book 11 ページ ２００５年１１月１４日 月曜日 午後２時５１分