Edirol V-440HD, Руководство пользователя

Страница: 70 / 92

70
MIDI implementation
❍
Hold 1 (controller number 64)
Status 2nd byte 3rd byte
BnH 40H xxH
❍
Portamento (controller number 65)
Status 2nd byte 3rd byte
BnH 41H xxH
❍
Sostenuto (controller number 66)
Status 2nd byte 3rd byte
BnH 42H xxH
❍
Soft (controller number 67)
Status 2nd byte 3rd byte
BnH 43H xxH
❍
Legato (controller number 68)
Status 2nd byte 3rd byte
BnH 44H xxH
❍
Hold 2 (controller number 69)
Status 2nd byte 3rd byte
BnH 45H xxH
❍
Sound Controllers 1–10 (controller numbers 70–79)
Status 2nd byte 3rd byte
BnH 46 - 4FH vvH
❍
General Purpose Controllers 5–8 (controller numbers 80–83)
Status 2nd byte 3rd byte
BnH 50 - 53FH vvH
❍
Portamento Control (controller number 84)
Status 2nd byte 3rd byte
BnH 54H vvH
❍
Effect Depth 2-5 (controller number 92–95)
Status 2nd byte 3rd byte
BnH 5C - 5FH vvH
●
Program Change
Status 2nd byte
CnH ppH
pp= program number: 00H - 7FH (prog.1 - Prog.128)
* This selects the input for Channel A and Channel B. For more detailed information refer
to the Bank Select parameters.
* If a non-selectable Program Change is received, it will be ignored.
●
Channel Pressure
Status 2nd byte
DnH vvH
* Just as for Control Change messages, you can make settings in MIDI Setup to use
Channel Pressure messages to control a wide variety of things. For details on the factory
settings, refer to “Settings Transmitted/Received Using MIDI” (p. 75).
●
Pitch Bend Change
Status 2nd byte 3rd byte
EnH llH mmH
mm, ll= pitch bend value:00 00H - 40 00H - 7F 7FH (-8192 - 0 -+8191)
* Just as for Control Change messages, you can make settings in MIDI Setup to use Pitch
Bend Change messages to control a wide variety of things. For details on the factory
settings, refer to “Settings Transmitted/Received Using MIDI” (p. 75).
■
System exclusive messages
Status Data bytes Status
F0H iiH, ddH,...,eeH F7H
F0H: System Exclusive Message status
ii= ID number: An ID number (manufacturer ID) that indicates the manufacturer to which
the exclusive message belongs. Roland’s manufacturer ID is 41H. ID numbers 7EH and 7FH
are used for Universal Non-realtime Messages (7EH) and Universal Realtime Messages
(7FH) to extend the MIDI specification.
dd, .. ee= data: 00H–7FH (0–127)
F7H: EOX (End Of Exclusive)
●
Data Set 1 (DT1)
This is the message that transfers actual data, and is used to specify data for a device.
Status
Data bytes Status
F0H 41H, dev, 00H, 00H, 10H, 12H, F7H
aaH, bbH, ccH, ddH, ..., eeH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 00H–1FH, factory setting is 10H)
00H 1st byte of model ID (V-440HD)
00H 2nd byte of model ID (V-440HD)
10H 3rd byte of model ID (V-440HD)
12H Command ID (DT1)
aaH Upper byte of address
bbH Address
ccH Address
ddH Data: the actual data to be transmitted. Multi-byte data is transmitted
in the order of the address.
: :
eeH Data
sum Checksum
F7H EOX (End Of Exclusive)
Status Data bytes Status
F0H 41H, dev, 00H, 51H, F7H
12H, aaH, bbH, ccH,
ddH, ..., eeH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 00H–1FH, factory setting is 01H)
00H Upper byte of model ID (V-Link message)
51H Lower byte of model ID (V-Link message)
12H Command ID (DT1)
aaH Upper byte of address
bbH Address
ccH Address
ddH Data: the actual data to be transmitted. Multi-byte data is transmitted
in the order of the address.
eeH Data
sum Checksum
F7H EOX (End Of Exclusive)
* For details on setting the address, size, and checksum, refer to “Calculating the
checksum (‘H’ is appended to hexadecimal numbers)” (p. 75).
* Data that exceeds 256 bytes must be divided into packets of 256 bytes or less for
transmission. If a subsequent “Data Set 1” message is transmitted, an interval of at least
20 ms must be left between packets.
2. MIDI messages transmitted from MIDI OUT
* If MIDI Thru is ON, MIDI messages received at MIDI IN are re-transmitted without
change from MIDI OUT.
* If MIDI Thru is ON, messages from the V-440HD itself will not be transmitted.
■
Channel voice messages
●
Control Change
* The messages assigned in MIDI Setup will be transmitted when you operate the panel.
The control changes that can be used are CC#1–5, 7–31, and 64–95. For the factory
settings, refer to “Settings Transmitted/Received Using MIDI” (p. 75).
❍
Bank Select (controller numbers 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
mm, ll= bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* When you select channel A or channel B inputs, make memory settings, or specify how
sub-channels are mixed in Presentation mode, these messages will be transmitted in
conjunction with Program Changes.