Edirol V-440HD, Руководство пользователя, Страница: 82 / 92

82
Settings and Parameters
When recording the V-440HD’s video output with an HD CAM deck, DVC PRO HD deck, HD non-linear editing device, or other
such equipment, it may be necessary to convert the V-440HD’s component output to HD-SDI signals. For this, you will need to
obtain a separate HD HD-SDI converter to convert the component signals to HD-SDI.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
* For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for connected HD recorder.
* Indications may vary with the device used.
HD-SDI Recording
Settings Parameter Related Page
1. HD/RGB Output 1. Output Format (1080i) Sw,
etc. Selects appropriate format for the HD-SDI
converter being used. p. 26
p. 58
5. Zooming Set to 100.
2. HD/RGB Input 3. Pre Scaling Mode There are times when the RGB video is not
displayed fully on the screen. Set the “3. Pre
Scaling Mode” to Manual and adjust with the
“4. Manual Pre Scaling” parameter. p. 27
p. 59
4. Manual Pre Scaling
5. Scaling Type (RGB) As RGB video features various differing as-
pect ratios, such as 4:3 and 16:9, it may be nec-
essary to adjust the aspect ratio while
observing the screen.
13. System 1. System Frame Rate Select the format appropriate for the output
device you are using. p. 49
p. 64
Settings Parameter Values
HD HD-SDI Converters Sync Signal: Use internal sync signal*
Frame Rate: 59.94 Hz*
HD Recorder Input Signal: HD-SDI signals*
Sync Signal: Use internal sync signal*
BNC Cable
HD HD-SDI Converter
HD Video Deck (HD-SDI)
D-Sub Cab
le
Component Cab
le
Component
Cable
Composite Cab
le
DV Camera, Player, Etc.
SD Video Output Device
HD Camera
HD Video Output Device
PC or Other Device
RGB Video Output Device