Edirol V-440HD, Руководство пользователя

Страница: 79 / 92

79
Settings and Parameters
Use the V-440HD’s component output for shows and other situations where the video is being output to plasma displays or high-
definition projectors.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
* For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for connected plasma displays or high-definition projectors.
HD Size16:9 Output
Settings Parameter Related Page
1. HD/RGB Output 1. Output Format (1080i) sw,
etc. Selects optimal format, e.g., 1080i or 720p,
for the connected device. p. 26
p. 58
5. Zooming Set value to 100 when entire screen is not
being displayed.
2. HD/RGB Input 3. Pre Scaling Mode There are times when the RGB video is not
displayed on the entire screen. Set the “3.
Pre Scaling Mode” to Manual and adjust
with the “4. Manual Pre Scaling” parame-
ter. p. 27
p. 59
4. Manual Pre Scaling
5. Scaling Type
(Channel input to RGB and
Channel A/B only) As the aspect ratio of the video in the RGB
and SD sections (Channel A/B) is not 16:9,
set this to “Fixed Aspect: Letter” or “Fixed
Aspect: Crop.”
3. System 1. System Frame Rate Select the format appropriate for the out-
put device you are using. p. 49
p. 64
Settings Parameter Values
Output Device (e.g., plasma display, high-defini-
tion projector) Set the input to “Component Input.”
D-Sub Cab
le
Component Cab
le
Component Cab
le
Composite Cab
le
Final Output (HD)
DV Camera, Player, Etc.
SD Video Output Device
HD Camera
HD Video Output Device
PC or Other Device
RGB Video Output Device
Plasma Display or Other Display