Edirol V-440HD, Руководство пользователя

Страница: 80 / 92

80
Settings and Parameters
In business presentations and other such situations, use the V-440HD’s RGB output when outputting video to a data projector.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
* For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for the data projector.
RGB Video Live Output
Settings Parameter Related Page
1. HD/RGB Output 1. Output Format (RGB) Sw,
etc. Selects optimal format, e.g., 1280 x 1024/60 to 640
x 480/60, for the connected device. p. 26
p. 58
5. Zooming Set value to 100 or lower when entire screen is not
being displayed, adjusting as you observe the
screen being displayed.
2. HD/RGB Input 3. Pre Scaling Mode There are times when excess video is displayed
on the screen. In such cases, Set the “3. Pre Scal-
ing Mode” to Manual and adjust with the “4.
Manual Pre Scaling” parameter. p. 27
p. 59
4. Manual Pre Scaling
5. Scaling Type As RGB video features various differing aspect
ratios, such as 4:3 and 16:9, it may be necessary to
adjust the aspect ratio while observing the
screen. If satisfactory results cannot be obtained
with “Full Size,” “Fixed Aspect: Letter,” or
“Fixed Aspect: Crop,” select “Manual” and make
fine adjustments to the “6. Manual X Scale” and
“7. Manual Y Scale” parameters.
Settings Parameter Values
Output Device (e.g., data projector, computer-
use liquid crystal display) Set the input to “RGB Input.”
Switch off if the screen features a 16:9 wide out-
put function.
D-Sub Cab
le
Component Cab
le
Component Cab
le
Composite Cab
le
Final Output (RGB)
DV Camera, Player, Etc.
SD Video Output Device
HD Camera
HD Video Output Device
PC or Other Device
RGB Video Output Device
Projector or Other Display