Edirol UA-101 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 64

Edirol UA-101 Скачать руководство пользователя страница 47

47

Troubleshooting

Are the power conservation settings of your computer turned off?

If power conservation settings are turned on for your computer, disable these
settings. (For details on how to disable them, refer to the owner’s manual of your
computer.)

Is there enough free space on your hard disk?

Delete unneeded files to increase the amount of free space.
After deleting the file(s), empty the recycling bin.

Is the USB connector enabled on your computer?

Refer to the owner’s manual for your computer, and verify that the USB connector
of your computer is enabled. The driver cannot be installed unless the USB
connector is enabled.

Does your computer meet the USB specification?

Operation may be unstable if you are using a computer that does not electrically
meet the USB specification. If so, you may be able to solve the problem by
connecting a USB repeater hub that has its own power supply.

Did you log onto Windows as a user with administrative privileges?

In order to install/uninstall/reinstall the UA-101 driver in Windows, you must log
onto Windows as a user with administrative privileges, such as Administrator.

Did you make the “Driver Signing Options” setting?

You must set “Driver Signing Options” in order to install/reinstall the driver.
(p. 17)

Did you make the “Driver Signing Options” setting?

You must set “Driver Signing Options” in order to install/reinstall the driver.
(p. 17)

Have you updated Windows XP?

If you have not updated Windows XP, the CPU may be heavily burdened when you
record or play back audio, and your system will not operate correctly.
Before you begin using the UA-101, please perform either of the following actions.
For details on updating, refer to the enclosed pamphlet.

• Update to Windows XP SP2 (recommended)

• Install the update module in Windows XP SP1

Can’t install/uninstall the driver

Windows displays an “Installing Hardware,” “Did not find digital signature”
dialog box.

Computer is sluggish

UA-101_e.book 47 ページ２００７年８月６日　月曜日　午後１時２３分

«
...
45
46
47
48
49
...
»

Содержание UA-101

































































Отзывы:

Нет отзывов