manualshive.com logo in svg

Edirol UA-101, Руководство пользователя, Страница: 12 / 64

Поделиться
Скачать
Edirol UA-101 Скачать руководство пользователя страница 12

 

12

 

Front and rear panel

 

fig.front.eps_60

 

13.

 

Direct monitor volume (direct monitor section)

 

fig.direct-volume

 

This adjusts the monitor volume.
As you turn this toward the left (toward 
OUTPUT MONITOR), the level of the 
sound being received via the input jacks 
will decrease. As you turn this toward 
the right (toward INPUT MONITOR), 
the level of the sound being output 
from your computer will decrease. 
When this knob is in the center position, 
the level of the sound being output 
from your computer and the level of the 
sound being input via the input jacks 
will both be at 100%.

 

14.

 

Monitor volume/Power switch

 

This adjusts the volume that is output from the 

 

headphone jack (16)

 

 and the 

 

monitor output jacks (27)

 

.

This also switches the power between on (ON) and standby (STANDBY) modes.

 

15.

 

Power indicator

 

This will light when the power is on.

 

16.

 

Headphone jack

 

The sound received at the input jacks and the sound being output by your computer 
will be mixed and output from this jack. Use the 

 

direct monitor volume knob 

(13)

 

 to adjust the balance between input and output.

Sound will still be output from the rear panel 

 

monitor output jacks (27)

 

 even if 

headphones are connected.

 

17.

 

USB indicator

 

This will light when you connect the UA-101 to your computer via a USB cable.

 

* If the USB indicator is blinking, the UA-101 has not been recognized correctly.

 

Lit red

 

The UA-101 is correctly recognized by your computer in Hi-Speed 
USB mode (p. 14)

 

Lit green

 

The UA-101 is correctly recognized by your computer in Full-
Speed USB mode (p. 14)

2

8

7

16

9

13

1

4

5

6

11 12

10

14

15

3

17

Volume

0%

0%

100%

100%

MONITOR

INPUT MONITOR

OUTPUT MONITOR

UA-101_e.book 12 ページ ２００７年８月６日　月曜日　午後１時２３分

Содержание UA-101

































































Отзывы:

Нет отзывов