Edirol StudioCanvas SD-20, Руководство пользователя

Страница: 56 / 276

56
Getting connected and installing drivers (Macintosh)
■
Installing the SD-20 driver (FreeMIDI)
Use the following procedure to install the SD-20 driver. The included SD-20
FreeMIDI driver is an add-on module for using the SD-20 with FreeMIDI. In
order to use it, FreeMIDI must be installed on the hard disk from which
you started up .
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the SD-20 Serial Installer icon (found in the Driver - FreeMIDI
Driver - Serial Connection folder of the CD-ROM) to start up the installer.
4
Click [Install] .
5
A dialog box will inform you that you will need to restart your Macintosh
when installation is finished. Click
[Continue] .
6
When the installation is complete, click [Restart] .
FreeMIDI settings
1
From the CD-ROM, copy the Driver - FreeMIDI Driver - Settings folder
onto the hard disk of your Macintosh.
2
Open the FreeMIDI Applications folder from the location into which you
installed FreeMIDI, and double-click the
FreeMIDI Setup icon to start it up.
3
When “ OMS is installed on this computer... ” appears, click [FreeMIDI] .
4
The first time the software is started up, a dialog box saying “ Welcome to
FreeMIDI! ” will appear. Click [Continue] .
5
When the FreeMIDI Preferences dialog box appears, click [Cancel] .
6
When the
About Quick Setup
dialog box appears, click
[Cancel]
.
SD-20e.book 56 ページ ２００５年３月２４日 木曜日 午後２時８分