20
Installing & Setting Up the Driver (Windows)
7
Use the
USB cable
to connect the
SD-80
to your
computer
.
1.
With the power switch turned
OFF
, connect the
AC cable
to the
SD-80
.
2.
Connect the
AC cable
to an electrical outlet.
3.
Use the
USB cable
to connect the
SD-80
to your
computer
.
8
Set the SD-80’s
power switch
to the
ON
position.
fig.2-20_30
9
If you are using Windows 98, an
Insert Disk
dialog box will
appear. Click
[OK]
.
10
The
New Hardware Found
dialog box will appear.
Input the following into the
“Copy files from”
field, and click
[OK]
.
fig.2-21a_40
D:\Driver\USB_ME98
* The drive name “
D:
” may be different
for your system. Specify the drive
name of your CD-ROM drive.
11
Once the driver has been
installed,
New Hardware Found
dialog box will close.
In the
SetupInf
dialog box, click
[OK]
. The
SETUPINF
dialog box will close.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
If you are using
Windows 98 and the
Insert Disk
dialog box
dose not appear, please
read
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.
If the
New Hardware
Found
dialog box does not
appear, re-install the
driver using the same
procedure as described in
Next, you need to make the driver settings.
(->
MIDI input and output destinations
If you were not able to install the SD-80 driver according to the procedure, or
if you are unable to use the SD-80 even after installing the driver, you must
delete the driver. For details on how to delete the driver, refer to
After deleting the driver, use the procedure described in
