EdgeMarc 4576 Enterprise Session Border Controller Installation Guide
4
Front Panel
Name
Description
A
Power LED
Off
Power switch is off (or no power from the AC outlet)
Green
Power is supplied to the unit
B
Status
Off
The unit could not boot up because of self test failure
Green
Self test passed
C
Erase Button
If you press the
Erase
button twice in quick succession, only the CLI
password will be changed back to its original password.
If you press the
Erase
button three times in quick succession, the EdgeMarc
4576 will revert back to the factory default settings. This will reset all
passwords and erase all prior configurations. The default LAN address will
be set to 192.168.1.1.
Caution
Using the Erase button as outlined above means any configuration made to
the EdgeMarc 4576 will be lost. Erasing the configuration means that IP
phones installed behind the EdgeMarc 4576 will not work and Internet
connectivity or network access for PCs will be down until the system is
reconfigured.
D
10/100 Mbps
Ethernet LAN
Ports
4 Local Area Network (LAN) ports to connect IP phones or an Ethernet
switch. The EdgeMarc 4576 can also be configured through any of these
ports using the web interface.
