Edge PresencePlus P4, Руководство пользователя

Страница: 149 / 182

01/05
P/N 120413
141
User’s Manual System Setup
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Output Delay and Output Duration
I / O #1, Pin #5
I / O #2, Pin #6
I / O #3, Pin #7
I / O #4, Pin #8
I/O 1 through 4 in the
I/O
column correspond to Pins 5 through 8 in the
Pin #
column.
Function (default: General Input)
General Input:
Input to the Sensor
General Output: Output from the Sensor that can be selected in a Test tool
Pass: Active when the entire inspection passes
Fail: Active when the inspection fails
System Error: Active when a system error occurs
Ready: Active when the Sensor is ready to accept another trigger.
Product Select: This input is used in conjunction with Product Change to select
inspection locations at which to begin execution.
Normally Open/Closed (default: Open)
Select the state (open or closed) that the output will take when not active.
Normally Open: The output becomes active when the logic condition controlling
the output becomes TRUE.
Normally Closed: The output becomes inactive when the logic condition
controlling the output becomes TRUE.
Output Delay (default: 0, range: 0–8,000 ms)
Output Delay is the time from a trigger to start an inspection until the Sensor
output turns ON. It is available only for general outputs.
NOTE: If processing time is longer than the output delay, the output will become
active immediately after the processing is finished.
Output Duration (default: Latched, range: 2–8,000 ms)
Latched:
Active until the condition changes.
Time: Active for a specific length of time.
NOTE: This option is available only for the general outputs; the other outputs
(Pass, Fail, System Error, and Ready) are latched only.
Processing Time Output Duration
Delay Latched
Trigger
Output
ON
OFF
ON
OFF