38
accept-lifetime <start-time>
{<end-time>| duration<seconds>|
infinite}
no accept-lifetime
Configure a key on the key chain and accept it
as an authorized time; the
no accept-lifetime
command delete it
send-lifetime <start-time>
{<end-time>| duration<seconds>|
infinite}
no send-lifetime
Configure the transmitting period of a key on
the key chain; the
no send-lifetime
command
delete the send-lifetime
3
）
Configure the route deviation
Command
Explanation
Router configuration mode
offset-list <access-list-number
|access-list-name>
{in|out }<number >[<ifname>]
no offset-list <access-list-number
|access-list-name>
{in|out }<number >[<ifname>]
Configure that provide a deviation value to the
route metric value when the port sends or
receives RIP data packet; the
no offset-list
<access-list-number |access-list-name>
{in|out }<number >[<ifname>]
command
removes the deviation table
4
）
configure and apply the route filtering
Command
Explanation
Router configuration mode
distribute-list {< access-list-number
|access-list-name >|prefix<prefix-list-
name>}{in|out} [<ifname>]
no distribute-list {<
access-list-number
|access-list-name >|prefix<prefix-list-
name>}{in|out} [<ifname>]
Configure and apply the access table and
prefix table to filter the routes. the
no
distribute-list {<
access-list-number
|access-list-name >|prefix<prefix-list-name
>}{in|out} [<ifname>]
command means do
not use the access table and prefix table
5
）
configure the split horizon
Command
Explanation
Interface configuration mode
ip rip split-horizon [poisoned]
no ip rip split-horizon
Configure that take the split horizon when the
port sends data packets; poisoned for poison
reverse the
no ip rip split-horizon
command
cancels the split horizon