Edge-Core ES4624-SFP Скачать руководство пользователя страница 204

Страница: 204 / 256

204

{<ip-address>|<TAG>} dont-capability-negotiate

” command cancels this configuration.

Parameter: <ip-address>

: Neighbor IP address.

<TAG>

: Name of the peer group.

Default:

Capability negotiation performed.

Command Mode:

BGP route mode and address-family mode.

Usage Guide:

As the negotiation is the default, it can be disabled with this configuration when it

is known that the partner BGP version is old which don’t support capability negotiation.

Example:

Last addition capability negotiation will not be realized in the connection by

configuring as follows.

Switch(config-router)#neighbor 10.1.1.64 dont-capability-negotiate

1.8.3.48 neighbor ebgp-multihop

Command: neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]

no neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]

Function:

Configures the EBGP neighbors can existing in different segment as well as its hop

count (TTL). The “

no neighbor {<ip-address>|<TAG>} ebgp-multihop [<1-255>]

” set that the

EBGP neighbors must be in the same segment.

Parameter: <ip-address>

: Neighbor IP address.

<TAG>

: Name of the peer group.

<1-255>

: Allowed hop count.

Default:

Must be in the same segment.

Command Mode:

BGP route mode and address-family mode.

Usage Guide:

Without this command, EBGP peers are required to be in the same segment

and after this command is configured, peer addresses may from different segments. The allowed

hop count can be configured and will be 255 if not.

Example:

Three device 10.1.1.64(AS100) and 11.1.1.120(AS300) connected respectively to the two

interface 10.1.1.66 and 10.1.1.100 of another device. IGP accessibilities of 10.1.1.64 and

11.1.1.120 on both side routes are ensured through static configuration. The neighbor

relationship is established only after both side are configured as follows:

on 10.1.1.64

Switch(config-router)#neighbor 11.1.1.120 ebgp-multihop

on 11.1.1.120

Switch(config-router)#neighbor 10.1.1.64 ebgp-multihop

After this, switches in different segments will be able to create BGP neighbor relationship

1.8.3.49 neighbor enforce-multihop

Command: neighbor {<ip-address>|<TAG>} enforce-multihop

Содержание ES4624-SFP

































































































































































































































































Результаты поиска

Содержание ES4624-SFP

Отзывы:

Edge-Core ES4624-SFP, Руководство по управлению маршрутизацией, Страница: 204 / 256

Результаты поиска

Содержание ES4624-SFP

Отзывы: