28
Match clauses:
as-path 60
Set clauses:
metric 10
Displayed information
Explanation
route-map a, deny, sequence 10
route-map a means the name of route map
is a, deny means the deny mode,
sequence 10 means the sequence number
is 10
Match clauses:
Match sub
as-path 60
Detailed contents in the Match sub
Set clauses:
Set sub
metric 10
Detailed content in the Set clause
1.2.5.1.4 show router-id
Command: show router-id
Function:
Show the content of router-id.
Parameter:
None
Default:
None
Command Mode:
Admin and Configuration Mode
Usage Guide:
None
Example:
1:
Switch#show router-id
Router ID: 20.1.1.1 (automatic)
2:
Switch#show router-id
Router ID: 20.1.1.2 (config)
1.3 Static Route
1.3.1 Introduction to Static Route
As mentioned earlier, the static route is the manually specified path to a network or a host.
Static route is simple and consistent, and can prevent illegal route modification, and is
convenient for load balance and route backup. However, it also has its own defects. Static route,