130
Default:
Not displayed
Command Mode:
All modes
Example:
Switch#show ip ospf border-routers
OSPF process 0 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, Vlan1, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, Vlan2, ABR, ASBR, Area 0.0.0.0
1.6.5.1.12 show ip ospf database
Command: show ip ospf [<process-id>] database[{
adv-router [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| asbr-summary[{<linkstate_id>| self-originate |adv-router <advertiser_router>}] |
externel [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| network [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| nssa-external [{<linkstate_id>| self-originate |adv-router <advertiser_router>}] |
opaque-area [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| opaque-as [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
|opaque-link [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| router [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
| summary [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]
|self-originate | max-age }]
Function:
Display the OSPF link state data base messages.
Parameter: <process-id>
is the process ID, ranging between 0~65535
<linkstate_id>
Link state ID, shown in point divided demical system
<advertiser_router>
is the ID of Advertising router, shown in point divided demcial IP address
format
Default:
Not displayed
Command Mode:
All modes
Usage Guide:
According to the output messages of this command, we can view the OSPF link
state database messages
Example:
Switch#show ip ospf database
Router Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum Link count
192.168.1.2 192.168.1.2 254 0x80000031 0xec21 1