Edge-Core ES4524M-PoE Скачать руководство пользователя страница 479

Страница: 479 / 560

VLAN Commands

4-209

protocol-vlan protocol-group

This command creates a protocol group, or to add specific protocols to a group. Use
the

form to remove a protocol group.

Syntax

protocol-vlan protocol-group

group-id

[{

add

remove

}

frame-type

frame

protocol-type

protocol

]

no protocol-vlan protocol-group

group-id

•

group-id

- Group identifier of this protocol group. (Range: 1-2147483647)

•

frame

- Frame type used by this protocol. (Options: ethernet, rfc-1042,

llc-other)

•

protocol

- Protocol type. The only option for the llc-other frame type is

ipx-raw. The options for all other frames types include ip, arp, rarp.

Default Setting

No protocol groups are configured.

Command Mode

Global Configuration

Example

The following creates protocol group 1, and specifies Ethernet frames with IP and
ARP protocol types:

protocol-vlan protocol-group vlan

This command maps a protocol group to a VLAN for the current interface. Use the

form to remove the protocol mapping for this interface.

Syntax

protocol-vlan protocol-group

group-id

vlan

vlan-id

no protocol-vlan protocol-group

group-id

vlan

•

group-id

- Group identifier of this protocol group. (Range: 1-2147483647)

•

vlan-id

- VLAN to which matching protocol traffic is forwarded.

(Range: 1-4093)

Default Setting

No protocol groups are mapped for any interface.

Command Mode

Global Configuration

28. SNAP frame types are not supported by this switch due to hardware limitations.

Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet

protocol-type ip

Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet

protocol-type arp

Console(config)#

Содержание ES4524M-PoE

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4524M-PoE

Отзывы:

Edge-Core ES4524M-PoE, Руководство по управлению, Страница: 479 / 560

Результаты поиска

Содержание ES4524M-PoE

Отзывы: