Edge-Core ES4524M-PoE Скачать руководство пользователя страница 471

Страница: 471 / 560

VLAN Commands

4-201

switchport forbidden vlan

This command configures forbidden VLANs. Use the

form to remove the list of

forbidden VLANs.

Syntax

switchport forbidden vlan

{

add

vlan-list

remove

vlan-list

}

no switchport forbidden vlan

•

add

vlan-list

- List of VLAN identifiers to add.

•

remove

vlan-list

- List of VLAN identifiers to remove.

•

vlan-list

- Separate nonconsecutive VLAN identifiers with a comma and no

spaces; use a hyphen to designate a range of IDs. Do not enter leading
zeros. (Range: 1-4093).

Default Setting

No VLANs are included in the forbidden list.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• This command prevents a VLAN from being automatically added to the

specified interface via GVRP.

• If a VLAN has been added to the set of allowed VLANs for an interface, then

you cannot add it to the set of forbidden VLANs for that same interface.

Example

The following example shows how to prevent port 1 from being added to VLAN 3.

Console(config)#interface ethernet 1/1
Console(config-if)#switchport forbidden vlan add 3
Console(config-if)#

Содержание ES4524M-PoE

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4524M-PoE

Отзывы:

Edge-Core ES4524M-PoE, Руководство по управлению, Страница: 471 / 560

Результаты поиска

Содержание ES4524M-PoE

Отзывы: