Edge-Core ES4524M-PoE Скачать руководство пользователя страница 407

Страница: 407 / 560

Interface Commands

4-137

Default Setting

• Auto-negotiation is enabled by default.
• When auto-negotiation is disabled, the default speed-duplex setting is

1000full for Gigabit Ethernet ports.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• The 1000BASE-T standard does not support forced mode. Auto-negotiation

should always be used to establish a connection over any 1000BASE-T port
or trunk. If not used, the success of the link process cannot be guaranteed.

• To force operation to the speed and duplex mode specified in a

speed-duplex

command, use the

no negotiation

command to disable auto-negotiation on

the selected interface.

• When using the

negotiation

command to enable auto-negotiation, the

optimal settings will be determined by the

capabilities

command. To set the

speed/duplex mode under auto-negotiation, the required mode must be
specified in the capabilities list for an interface.

Example

The following example configures port 5 to 100 Mbps, half-duplex operation.

Related Commands

negotiation (4-137)
capabilities (4-138)

negotiation

This command enables autonegotiation for a given interface. Use the

form to

disable autonegotiation.

Syntax

[

]

negotiation

Default Setting

Enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Console(config)#interface ethernet 1/5
Console(config-if)#speed-duplex 100half
Console(config-if)#no negotiation
Console(config-if)#

Содержание ES4524M-PoE

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4524M-PoE

Отзывы:

Edge-Core ES4524M-PoE, Руководство по управлению, Страница: 407 / 560

Результаты поиска

Содержание ES4524M-PoE

Отзывы: