Edge-Core ES4524M-PoE Скачать руководство пользователя страница 243

Страница: 243 / 560

Quality of Service

3-199

•

Back

– Returns to previous page without making any changes.

Policy Rule Settings

- Class Settings -

•

Class Name

– Name of class map.

•

Action

– Shows the service provided to ingress traffic by setting a CoS, DSCP, or

IP Precedence value in a matching packet (as specified in Match Class Settings on
3-195).

•

Meter

– The maximum throughput and burst rate.

Rate

(kbps) – Rate in kilobits per second.

Burst

(bytes) – Burst in bytes.

•

Exceed Action

– Specifies whether the traffic that exceeds the specified rate will

be dropped or the DSCP service level will be reduced.

•

Remove Class

– Deletes a class.

- Policy Options -

•

Class Name

– Name of class map.

•

Action

– Configures the service provided to ingress traffic by setting a CoS, DSCP,

or IP Precedence value in a matching packet (as specified in Match Class Settings
on page 3-147). (Range - CoS: 0-7, DSCP: 0-63)

•

Meter

– Check this to define the maximum throughput, burst rate, and the action

that results from a policy violation.

Rate

(kbps) – Rate in kilobits per second. (Range: 1-100000 kbps or maximum

port speed, whichever is lower)

Burst

(bytes) – Burst in bytes. (Range: 64-524288)

•

Exceed

– Specifies whether the traffic that exceeds the specified rate or burst will

be dropped or the DSCP service level will be reduced.

Set

– Decreases DSCP priority for out of conformance traffic. (Range: 0-63)

Drop

– Drops out of conformance traffic.

•

Add

– Adds specified criteria to the policy map.

Содержание ES4524M-PoE

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4524M-PoE

Отзывы:

Edge-Core ES4524M-PoE, Руководство по управлению, Страница: 243 / 560

Результаты поиска

Содержание ES4524M-PoE

Отзывы: