Edge-Core ES4524M-PoE Скачать руководство пользователя страница 400

Страница: 400 / 560

Command Line Interface

4-130

[

]

{

permit

deny

}

untagged-802.3

{

any

host

source

source address-bitmask

}

{

any

host

destination

destination address-bitmask

}

•

tagged-eth2

– Tagged Ethernet II packets.

•

untagged-eth2

– Untagged Ethernet II packets.

•

tagged-802.3

– Tagged Ethernet 802.3 packets.

•

untagged-802.3

– Untagged Ethernet 802.3 packets.

•

any

– Any MAC source or destination address.

•

host

– A specific MAC address.

•

source

– Source MAC address.

•

destination

– Destination MAC address range with bitmask.

•

address-bitmask

– Bitmask for MAC address (in hexidecimal format).

• vid – VLAN ID. (Range: 1-4093)
•

vid-bitmask –

VLAN bitmask. (Range: 1-4093)

•

protocol

– A specific Ethernet protocol number. (Range: 600-fff hex.)

•

protocol

bitmask

– Protocol bitmask. (Range: 600-fff hex.)

Default Setting

None

Command Mode

MAC ACL

Command Usage

• New rules are added to the end of the list.
• The

ethertype

option can only be used to filter Ethernet II formatted packets.

• A detailed listing of Ethernet protocol types can be found in RFC 1060. A few

of the more common types include the following:
- 0800 - IP
- 0806 - ARP
- 8137 - IPX

Example

This rule permits packets from any source MAC address to the destination address
00-e0-29-94-34-de where the Ethernet type is 0800.

Related Commands

access-list mac (4-128)

25. For all bitmasks, “1” means care and “0” means ignore.

Console(config-mac-acl)#permit any host 00-e0-29-94-34-de ethertype 0800
Console(config-mac-acl)#

Содержание ES4524M-PoE

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES4524M-PoE

Отзывы:

Edge-Core ES4524M-PoE, Руководство по управлению, Страница: 400 / 560

Результаты поиска

Содержание ES4524M-PoE

Отзывы: