Edge-Core EAP101, Руководство пользователя

Страница: 43 / 62

Chapter 4
| Wireless Settings
Radio Settings
– 43 –
■
80MHz — For 802.11ac+a+n and 802.11ax
■
Channel — The radio channel that the access point uses to communicate with
wireless clients. When multiple access points are deployed in the same area, set
the channel on neighboring access points at least five channels apart to avoid
interference with each other. For example, for 11g/n 20 MHz mode you can
deploy up to three access points in the same area using channels 1, 6, 11.
Note that wireless clients automatically set the channel to the same as that used
by the access point to which it is linked. (The available channels are dependent
on the 802.11 Mode, Channel Bandwidth, and Country Code settings.)
Selecting Auto enables the access point to automatically select an unoccupied
radio channel. (Default: Auto)
■
Beacon Interval — The rate at which beacon signals are transmitted from the
access point. The beacon signals allow wireless clients to maintain contact with
the access point. They also carry power-management and other information.
(Range: 100-1024 TUs; Default: 100 TUs)
Wireless Networks —
General Settings
Figure 27: Radio Settings (General Settings)
The following items are displayed in this section of the Wireless Settings page:
■
Status — Enables or disables the wireless service on this VAP.
■
SSID — The name of the basic service set provided by a Virtual Access Point
(VAP) interface. Clients that want to connect to the network through the access
point must set their SSID to the same as that of the access point’s VAP interface.
(Default: Edgecore5G-# (where # is 1-16) for 5 GHz, Edgecore2.4G-#
(where # is 1-16) for 2.4 GHz; Range: 1-32 characters)
■
Site Survey — Scans for all wireless networks that are broadcasting their SSID.
■
Broadcast — The SSID can be broadcast at regular intervals so that wireless
stations searching for a network connection can discover it. This allows wireless