Edge-Core EAP101, Руководство пользователя

Страница: 55 / 62

Chapter 5
| System Settings
User Accounts
– 55 –
Restoring
Configuration
Settings
The Restore page allows you to upload configuration settings from a management
workstation. The specified file must be one that was previously backed up from the
access point.
Figure 37: Restoring Configuration Settings
Upgrading Firmware
You can upgrade new access point software from a local file on the management
workstation. New software may be provided periodically from Edgecore.
After upgrading new software, you must reboot the access point to implement the
new code. Until a reboot occurs, the access point will continue to run the software
it was using before the upgrade started. The access point supports dual software
images, so if newly loaded software is corrupted, the alternate image will be used
on the next reboot. Configuration settings are stored separately from the software,
so the current settings will always be used for any new software. However, note that
if the current configuration settings are corrupted, the system defaults will be used.
Figure 38: Upgrading Firmware
User Accounts
The User Accounts page allows you to control management access to the AP based
on manually configured user names and passwords.
Figure 39: User Accounts