Edge-Core EAP101, Руководство пользователя

Страница: 16 / 62

Chapter 1
| Introduction
AP Setup Wizard
– 16 –
Step 3 Select to Cloud Manage AP or Stand-Alone — To manage the AP using the
Edgecore ecCLOUD controller, select “Yes, I will manage this device with the Edge-
core Networks Cloud controller,” and then click “Done.” Otherwise, select “No, I
will be operating this device in stand-alone mode” and continue to Step 4.
Figure 4: Select Cloud Managed or Stand-Alone
If you select to manage the AP using the Edgecore ecCLOUD controller, go to
cloud.ignitenet.com to register your AP. Log in and select Devices from the menu.
Click Add Device and enter the AP serial number and MAC address to register the
AP with your cloud network. The serial number and MAC address can be found on
the product packaging or label.
Note: This manual describes the configuration interface for stand-alone mode.
Refer to the Edgecore ecCLOUD Controller User Manual for information on
configuring the AP through the cloud interface.