Edelbrock QwikData 2, Быстрый старт

Страница: 4 / 40

3
Step 1. Software Installation
Edelbrock QwikData 2
USB Drivers
The QwikData 2 Power to Win install disk will copy the current device drivers during installation to your
"C:\Power to Win" directory. Follow the instructions below to complete the installation of your USB drivers.
NOTE: Some files and components of QwikData 2 installation are referred to as Power To Win and EFI.
First Time Installation
USB Driver Initialization:
Power up your Logger and connect to your Laptop with the USB cable. When
connected the logger hardware will be detected and the "Found New Hardware" wizard will open. Follow the
instructions to install the driver making sure to point to the "C:\Power to Win" directory if prompted.
1. From Hardware Update Wizard window select Install from a specific location. Select Next to continue.
2. Enter Path: C:\Power To Win or select from pull down in window. Select Next to continue. Update wizard
will locate and setup necessary driver device.
Notes
· Drivers can only be installed or updated when the logger is powered up and connected to the USB port.