Edelbrock QwikData 2, Быстрый старт

Страница: 37 / 40

36
Getting Started
Edelbrock QwikData 2
Pre Outing Check-List
To help verify your car is properly setup for each session use the following guide for setting up your data logger
system.
1. Open the Configuration program
2. Set Current Car for setup.
3. Register the LCU. Specify Car Setup file and download path.
4. Calibrate Sensors as necessary if any sensor changes have been made.
5. Verify Logging Table settings, channels for logging, channel sample rates and enable criteria.
6. Update Outing Data file with driver and comments information.
7. Update Setup sheet.
8. Open USB Communication program.
9. Open the Comms Display Window
10. Send Config file to Logger.
11. Verify sensor functions and channel values.
12. Manually Start Logger under Syscon option and log sample data to test setup.
13. Stop data logging and Download sample data file.
14. Open Data Analysis program.
15. Open Downloaded Data File and verify logged data.