Magg™ 480 User Manual
Document: UMDU011367.docm
Revision: A06
Created by: JS
Date: 13 Apr 2021
IPN: 3063241-A06
Source Location: C:\ePDM\ISLEng\Products\DU-MiniMag\Manuals\UMDU011367.docm
Page 5 of 38
User Ma
nual
About this Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi
Technologies equipment. Correct and prudent operation rests with the operator who must thoroughly
understand the operation, maintenance, service and job requirements. The specifications and
information in this manual are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual endeavors to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality
may differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice.
Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government regulations.
This manual is copyright © 2020 by Eddyfi Robotics Inc. All rights reserved.
Description
The
Magg™ 480 is a magnetic tracked crawler capable of driving vertically or horizontally inverted along
ferrous (iron based) surfaces. Additionally, the magnet modules allow the vehicle to pull longer lengths of
tether than what could normally be achieved without magnets when travelling in steel pipes or on steel
decks. The crawler comes equipped with a Spectrum 90
™, two 901 lights and a rear facing Sapphire™
camera. The vehicle uses two Minitrac
™ 8000 for motive power that are mounted underneath the main
chassis plate. The vehicle utilizes two powerful rare earth magnet modules that can be manually
adjusted to accommodate different pipe diameters and strength requirements.
