Magg™ 480 User Manual
Document: UMDU011367.docm
Revision: A06
Created by: JS
Date: 13 Apr 2021
IPN: 3063241-A06
Source Location: C:\ePDM\ISLEng\Products\DU-MiniMag\Manuals\UMDU011367.docm
Page 22 of 38
User Ma
nual
To remove the modules from the vehicle, do the following:
1. Lay the vehicle on its side; bracing may be required.
2. Cover the top magnet module with foam, wood or some other non-ferrous material at least
50 mm (2 in) thick.
3. Remove the 4x M6 x 30 mm FHMS from the bottom magnet module.
MAKE SURE TO HOLD
THE MODULE INTO POSITION SO IT DOESN’T ‘JUMP’ ONTO THE OTHER MODULE!
4. Very carefully slide the loose module down and away from the still attached module and store in
a safe place.
5. The remaining module may now be removed.
Installation is the exact opposite of removal.
