Edco ASB-14 Скачать руководство пользователя страница 19

MPS-I-0819

Page 18

Page 19

MPS-I-0819

E-SPTS-I-0809

800-638-3326 • edcoinc.com • [email protected]

800-638-3326 • edcoinc.com • [email protected]

EQUIPMENT DEVELOPMENT CO., INC.

EQUIPMENT DEVELOPMENT CO., INC.

      

Equipment Development Company, Inc. herein referred to as EDCO (Seller) warrants that 

each new unit manufactured by EDCO to be free from defects in material and workmanship 
in normal use and service for a period of (1) one year (except for the cutter drum assembly 
on all model concrete/asphalt planers AND the chisel head assembly on all model ALR’s & 
ALR-BS in which case the warranty period shall be 90 days) from date of shipment to the 
original retail or equipment rental center owner.

Accessories or equipment furnished and installed on the product by EDCO but manufactured by 

others, including, but not limited to engines, motors,electrical components, transmissions etc., 
shall carry the accessory manufacturers own warranty.

EDCO will, at its option, repair or replace, at the EDCO factory or at a point designated by 

EDCO, any part which shall appear to the satisfaction of EDCO inspection to have been 
defective in material or workmanship.

EDCO  reserves  the  right  to  modify,  alter  and  improve  any  part  or  parts 

without incurring any obligation to replace any part or parts previously sold without such 
modified, altered or improved part or parts.

This warranty is in lieu of and excludes all other warranties, expressed, implied, statutory, 

or otherwise created under applicable law including, but not limited to the warranty of 
merchantability and the warranty of fitness for a particular purpose in no event shall seller 
or the manufacturer of the product be liable for special, incidental, or consequential dam-
ages, including loss of profits, whether or not caused by or resulting from the negligence 
of seller and/or the manufacturer of the product unless specifically provided herein. In ad-
dition, this warranty shall not apply to any products or portions there of which have been 
subjected to abuse, misuse, improper installation, maintenance, or operation, electrical 
failure or abnormal conditions and to products which have been tampered with, altered, 
modified, repaired, reworked by anyone not approved by seller or used in any manner 
inconsistent with the provisions of the above or any instructions or specifications provided 
with or for the product.

FORCE MAJEURE

Seller’s obligation hereunder are subject to, and Seller shall not be held responsible for, any 

delay or failure to make delivery of all or any part of the Product due to labor difficulties, 
fires, casualties, accidents, acts of the elements, acts of God, transportation difficulties, 
delays by a common carrier, inability to obtain Product, materials or components or qualified 
labor sufficient to timely perform part of or all of the obligations contained in these terms 
and conditions, governmental regulations or actions, strikes, damage to or destruction in 
whole or part of manufacturing plant, riots, terrorist attacks or incidents, civil commotions, 
warlike conditions, flood , tidal waves, typhoon, hurricane, earthquake, lightning, explosion 
or any other causes, contingencies or circumstances within or without the United States not 
subject to the Seller’s control which prevent or hinder the manufacture or delivery of the 
Products or make the fulfillment of these terms and conditions impracticable. In the event 
of the occurrence  of any of the foregoing, at the option of Seller, Seller shall be excused 
from the performance under these Terms and Conditions, or the performance of the Seller 
shall be correspondingly extended.

This document sets forth the terms and conditions pursuant to which the purchaser (“Pur-

chaser”) will purchase and Equipment Development Co.Inc. (“Seller”)will sell the products, 
accessories, attachments (collectively the Products “) ordered by the Purchaser. These 
terms and conditions shall govern and apply to the sale of Seller’s Products to Purchaser, 
regardless of any terms and conditions appearing on any purchase order or other forms 
submitted by Purchaser to Seller, or the inconsistency of any terms therein and herein. 

1. PRICE

 All prices set forth on any purchase order or other document are F.O.B. Sellers facility or dis-

tribution point, as may be determined by Seller  (F.O.B.Point). All prices are exclusive of any 
and all taxes, including, but not limited to, excise, sales, use, property or transportation taxes 
related to the sale or use of the Products, now or hereafter imposed, together with all penalties 
and expenses. Purchaser shall be responsible for collecting and/or paying any and all such 
taxes, whether or not they are stated in any invoice for the Products. Unless otherwise speci-
fied herein, all prices are exclusive of inland transportation, freight, insurance and other costs 
and expenses relating to the shipment of the Products from the F.O.B. point to Purchaser’s 
facility. Any prepayment by Seller of freight insurance and other costs shall be for the account 
of Purchaser 

and shall be repaid to Seller.

2. PAYMENT TERMS

 Payment terms are as follows. 2% 10 days (to approved and qualified accounts). Net 30 

days. This is a cash discount for invoices paid within 10 days after the invoice date, regard-
less of date of receipt of shipment.  This is not a trade discount and will not be granted to 
accounts that do not adhere to stated terms.

 *All past due accounts are subject to a late payment fee of 1.5% per month or a maximum 

allowed by law if different, along with the expenses incidental to collection including reason-
able attorney’s fees and costs.

 *Seller reserves the right to hold shipments against past due accounts.
 *Seller reserves the right to alter payment terms.

 3. FREIGHT TERMS

 All shipments will be made F.O.B. shipping point as designated in these Terms and Condi-

tions, and title shall pass at the F.O.B. point.  Delivery to the initial common carrier shall 
constitute delivery to the Purchaser.  Any claims for loss or damage during shipment 
are to be filed with carrier by the Purchaser.  Seller will not assume responsibility for the 
performance of the carrier.

 Back orders will be shipped in the most practical fashion with charges consistent with 

our freight policy established with the original order. UPS, FED EX, MAIL or shipments 
by other couriers are subject to the same terms and conditions as outlined in paragraph 
#3”Freight Terms”. 

 4. DELIVERY, DAMAGES, SHORTAGES

 Seller shall use reasonable efforts to attempt to cause the Products to be delivered as provided 

for in these Terms & Conditions.  Delivery to the initial common carrier shall constitute the delivery 
to the Purchaser.  Sellers responsibility, in so far as transportation risks are concerned ceases 
upon the delivery of the Products in good condition to such carrier at the F.O.B. point and all the 
Products shall be shipped at the Purchaser’s risk.  Seller shall not be responsible or liable for 
any loss of income and/or profits, or incidental, special, consequential damages resulting from 
Seller’s delayed performance in shipment and delivery.

 5. RETURN OF DEFECTIVE PRODUCTS

 Defective or failed material shall be held at the Purchaser’s premises until authorization has 

been granted by Seller to return or dispose of Products.  Products that are to be returned 
for final inspection must be returned Freight Prepaid in the most economical way.  Credit 
will be issued for material found to be defective upon Seller’s inspection based on prices 
at time of purchase.

 6. PRODUCTS ORDERED IN ERROR

 Products may be returned, provided that claim is made and Seller is notified within 7 days 

of receipt of Products, and the Products are in original buyer’s possession not more than 
30 days prior to return, subject to Seller’s approval. If Products are accepted for return, 
they must be Freight Prepaid and buyer will be charged a minimum of 15% restocking 
charge, plus a charge back for outbound freight charges if the original order  was shipped 
prepaid. Returns are not accepted for any Products that are specifically manufactured to 
meet the buyer’s requirement of either specifications or quantity.

 AGREEMENTS

 These Terms and Conditions constitute the entire agreement between Seller and Purchaser as 

it relates to terms and conditions of sale, and supersedes any and all prior oral or written agree-
ments, correspondence, quotations or understandings heretofore in force between the parties 
relating to the subject matter hereof.  There are no agreements between Seller and Purchaser 
with respect to the Product herein except those specifically set forth in and made part of these 
terms and conditions.  Any additional terms, conditions and/or prices are rejected by Seller.

 These terms and conditions may be modified, cancelled or rescinded only by a written 
 agreement of both parties executed by  their duly authorized agents.

 

USE ONLY GENUINE EDCO PARTS & ACCESSORIES

 

For your own safety, the safety of others and the life of your machine.

 

SUBMIT ALL WARRANTY CLAIMS AT:

 

edcoinc.com/customer-support/warranty-claim-form/

LIMITED EQUIPMENT WARRANTY OF SALE 

TERMS AND CONDITIONS 

(NOT APPLICABLE TO SALES THROUGH AUTHORIZED DISTRIBUTION)

Содержание ASB-14





















Отзывы: