EDAN SE-1201, Руководство пользователя

Страница: 78 / 138

SE-1201 Electrocardiograph User Manual Managing Orders
- 71 -
Chapter 8 Managing Orders
NOTE:
To use the order function, the Smart ECG Viewer software of the manufacturer
must be installed in the PC.
Select
Order
on the main screen2 to open the
Order Manager
screen.
Figure 8-1 Order Manager
Screen
8.1 Loading Orders
Before loading orders, please configure on the
Order Setup
screen. For details, please refer to
Section 8.5 “Setting Orders”.
Operation procedures are as follows:
1. Connect the electrocardiograph to the PC installed with the Smart ECG Viewer software by
using an Ethernet cable recommended by the manufacturer.
2. Set
Remote IP
,
Local IP
,
Gateway
and
Subnet Mask
in the
Transmission Setup
window.
For details, please refer to Section 7.1.1 “Transmitting ECG Data in DAT Format through Net
Cable”.
3. Select
Order
on the main screen2 to open the
Order Manager
screen.
4. Select
Load
on the
Order Manager
screen to load orders from the Smart ECG Viewer
software, and then a hint will be displayed as follows.